Backing Varnish

Product Details:

Jyoti B 165 is an alkyd / phenolic resin based baking impregnating varnish having Thermal class-B (Thermal 130°C) It is suitable for the impregnation of electrical coil & windings of Motor & transformers. Coils and armature windings impregnated with Jyoti-B-165 and baked correctly are sufficiently rigid to withstand high rotational speed without throwing of distorting such electrical hand tools. Jyoti-B-165 is also used for high voltage machines and devices which are exposed to humidity and tropical conditions. The cured varnish film gives high buils, extra high bonding strength performance, greater flexibility, toughness, rigid properties and is resistance to chemicals, mild acids, alkalies & hot transformer oils. Jyoti -B-165 can be used in explosion proof electrical equipments.

Uses: Jyoti-B-165 is recommended for impregnation of high speed rotor in electrical hand tools, kitchen motors, vacuum cleaners, locomotive motors and other machines exposed to frequent high loads, it is extrevenely satisfactory when used for heavy duty equipment which is subject to mechanical vibrations at centrifugal stresses.

Additional Information:

• Delivery Time: 3-4 DAYS

Product Details:

Jyoti-B-195 is a baking impregnating varnish based on alkyd and phenolic resins. It is useful for thermal class B (130°C) The cured varnish film is characterized by resistance to moisture and chemicals, excellent bonding strength, good dielectric properties, quick drying and curing, good flexibility, very good penetration power.


Properties & Suggested Uses: Jyoti-B-95 can be applied and vacuum methods. Jyoti-B-195 is used as a banking varnish with shorter curing chedule with comparision to other banking varnishes for empregnation of windings of moter stators and transformers.

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Our company has specialized in the sphere of manufacturing a wide range of polyester varnish Jyoti-131-FD. It is widely used to cure a tough, rigid infusible solid. Suitable for trickle impregnation applications, our liquid polyester varnish has been acclaimed for its heat resistance, high bond strength and excellent electrical properties.

 

Application Areas:

• Impregnation of very high speed rotating armatures, power tools and automatic generators
• Transfer coil and capacitor impregnation

Salient Features:

• Temperature class 250C
• Cures fast and gives a tough, rigid mass having excellent mechanical and electrical properties most suitable for trickle impregnation
• Excellent bond strength at elevated temperatures - ideal for very high speed rotating armature, power tools and automotive generators
• Excellent electrical properties over a wide range of temperature
• Compatible with practically all materials in electrical equipment
• Class F

Application Methods:

• Trickle Impregnation
• Dipping
• Automotive conveyorized roll through
• Vacuum pressure impregnation

Additional Information:

• Delivery Time: 3-5- Days

Product Details:

Description: Jyoti 151 J is an electric insulating heat curing impregnating varnish based on modified polyester resin.


Areas of Application

In electrical machines, Jyoti 151 J is used both for manufacturing and repairing the following Thermal class H (180) objects:

• Standard motors
• Generators
• Transformers
• Drives in the chemical industry
• Properties of cured material

 The cured material displays very good film formation and resistance to chemicals. The relatively elastic varnish film has good heat resistance. Owing to its temperature index of 180-200 can be used for machines in thermal class H. A reduction in the degree of hardness of enameled wires generally used does  not occur if the components are properly impregnated. Jyoti 151 J contains mild solvents leading to better work environment.

Application Methods

• JYOTI 151 J is processed by all conventional impregnating methods, such as dipping, rolling or flooding. It can also be processed under vacuum. In this case, the vacuum should not drop below 20 mbar to avoid high solvent evaporation. The most advantageous impregnating method in each case depends on the given technical possibilities of the plant, the structure of the components, and the demands placed on the object to be impregnated under operating conditions.
• Jyoti 151 J displays low susceptibility to the influence of foreign substances, such as punching grease, oils or primers, however, contamination of the varnish should be avoided as much as possible. After drainage time of 15-45 minutes at room temperature, the product is cured in the circulating-air oven at the temperatures and periods of time given. For large objects or those with a complicated winding structure a two-stage curing process is recommended to ensure removal of the solvents.

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Distinctive properities & suggested uses

• Jyoti -F-150 is a baking impregnating varnish based on isophthalic alkyd   Resin. It is recommended for Thermal class F (155 degreeC)
• The cured varnish film is characterized by high flexibility very good elastic properities, toughness, adhesion and extra high bonding strength at the operating temperature.
• Jyoti -F-150 is resistance to humidity, mild acids and alkalies and chemicals. The cured varnish film possesses very good dielectric properities.
• Jyoti -F-150 is recommended for all type of electricals equipment such as high speed rotor, armatures, locomotive motors and large machines where increased
• Flexibility and thermal class F(155 degreeC) is requires.
• Jyoti -F-150 can be applied by vacuum and dipping methods.

 

Product Details:

Description: Jyoti CPV14000 is a alkyd phenolic based core plate varnish. The product consists of a polymeric binder,After evaporation of the solvent by means of a conveyerised baking oven, the resin reacts under application of heat to form a uniform cured film. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC)

Areas of Application: Jyoti CPV14000 is suitable for insulation of hot or cold rolled core sheets. Punched laminations are suitable for electrical machines such as motors, fans, hydro and turbo generators etc

Proprties of Cured Material: The cured film has remarkably good adhesion and punching quality. A temperature index of 155 enables the varnish Jyoti CPV14000 to be used for machines in thermal class F (1550C).

Appplicataion Methods: 

• Jyoti CPV14000 is applied with the help of rubber rollers in a conveyorised oven. The thickness of the varnish film is adjusted with the help of roller pressure and thinning the varnish with Jyoti Thinner CPV14000. The curing of varnish film takes place progressively in a heated oven, where temperature is maintained in the range of 350-4500C.
• For varnish film of 5 to 10 um, curing period of 2 to 3 minutes depending on the length of heating oven is necessary for achieving required electrical and mechanical properties. Good exhaust of volatile solvent vapors from curing oven is necessary

 

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Jyoti F-157 is an electric insulating heat curing impregnating varnish based on isophthalic alkyd resin. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC)

Areas Of Application: In electrical machines, JYOTI F-157 is used both for manufacturing and repairing the following Thermal class F (155) objects:

• Standard motors
• Generators
• Transformers
• Drives in the chemical industry

Application Method: 

• Jyoti F-157 is processed by all conventional impregnating methods, such as dipping, rolling or flooding. It can also be processed under vacuum. In this case, the vacuum should not drop below 20 mbar to avoid high solvent evaporation. The most advantageous impregnating method in each case depends on the given technical possibilities of the plant, the structure of the components, and the demands placed on the object to be impregnated under operating conditions.
• Jyoti F-157 displays low susceptibility to the influence of foreign substances, such as punching grease, oils or primers, however, contamination of the varnish should be avoided as much as possible. After drainage time of 15-45 minutes at room temperature, the product is cured in the circulating-air oven at the temperatures and periods of time given. For large objects or those with a complicated winding structure a two-stage curing process is recommended to ensure removal of the solvents.

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Jyoti H 171 is an electric insulating heat curing impregnating varnish based on polyesterimide. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC)

Areas of Application: In electrical machines, Jyoti H 171A is used both for manufacturing and for repairing the following:

• Traction motors
• Centrifugal motors
• Generators
• Transformers
• Cooling machines
• Drives for ships
• Drives for mines

Application Methods: 

• Jyoti H 171 A is processed by all conventional impregnating methods, such as dipping, rolling, or flooding. It can also be processed under vacuum. In this case, the vacuum should not drop below 20 mbar to avoid the removal of too much solvent. The most advantageous impregnating method in each case depends on the given technical possibilities of the plant, the structure of the components, and the demands placed on the object to be impregnated under operating conditions.
• Jyoti H 171 A impregnating varnish displays low susceptibility to the influence of foreign substances, such as punching grease, oils or primers, however, pollution of the varnish should be avoided as much as possible. After a drainage time of 15 to 45 minutes at room temperature, the product is cured in the circulating-air oven at the temperatures and for the periods of time given. A two-stage curing process is recommended for large objects or those with a complicated winding structure to ensure removal of the solvents.

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Jyoti -FR-163 is an electric insulating heat curing impregnating varnish based on epoxy melamine. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC)

Areas of Application: Jyoti -FR-163 is used for impregnation of electrical machines especially stators of hermetic motors operating with refrigerants R-11 and R-22 and fractional horsepower motors

 

Properties of cured materia: The cured material displays good film formation, which is resistant to refrigerants R-11 and R-22. Owing to its high temperature index 180-200, JYOTI-FR-163 can be used for machines in class H.

 

Application Methods: 

• Jyoti-FR-163 A is processed by all conventional impregnating methods, such as dipping, rolling or flooding. It can also be processed under vacuum.  In this case, the vacuum should not drop below 20 mbar to avoid high solvent evaporation. The most advantageous impregnating method in each case depends on the given technical possibilities of the plant, the structure of the components, and the demands placed on the object to be impregnated under operating conditions.
• Jyoti -FR-163 displays low susceptibility to the influence of foreign substances, such as punching grease, oils or primers, however, contamination of the varnish should be avoided as much as possible. After drainage time of 15-45 minutes at room temperature, the product is cured in the circulating-air oven at the temperatures and periods of time given. For large objects or those with a complicated winding structure a two-stage curing process is recommended to ensure removal of the solvents.

Additional Information:

• Delivery Time: 3-4 Days

Product Details:

Description:

• Jyoti-B-192 is an air-drying insulating varnish based on phenolic resin. It is fast air drying and useful for thermal class B(130o C). It is used as finishing varnish and impregnating varnish to protect electrical machines and appliances against moisture and chemicals.
• The elastic varnish film is characterized by very good mechanical properties such as hardness, flexibility, penetration, adhesion and bonding   strength. The cured film is resistance to moisture, dilute acids, alkalis, chemicals like benzene & toluene oils and tropical climate from OoC to 55oC. It has good dielectric behavior and dielectric strength.

 

Application Method: Jyoti -B-192 can be applied by spraying, brushing & dipping methods. Curing occurs at room temperature but can be made faster by heat. The supplied is used   in application methods and second coat is done after 60 minutes, if desired. The varnish filled tank is covered tightly to prevent losses of solvents viscosity can be well maintained. Otherwise THINNER-B-192 is used to adjust optimum viscosity.

Uses: 

• Jyoti -B-192 is used as a finishing, impregnating & coating varnish for stares, transformer, electric motors, transformer oil tanks, synthetic resins, stamping stacks bonded
• Phenolic laminates circuit boards. Jyoti-B-192 is used to protect against chemicals & moisture to above electrical appliances

 

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Description:

• Jyoti-B-192 is an air-drying insulating varnish based on phenolic resin. It is fast air drying and useful for thermal class B(130o C). It is used as finishing varnish and impregnating varnish to protect electrical machines and appliances against moisture and chemicals.
• The elastic varnish film is characterized by very good mechanical properties such as hardness, flexibility, penetration, adhesion and bonding   strength. The cured film is resistance to moisture, dilute acids, alkalis, chemicals like benzene & toluene oils and tropical climate from OoC to 55oC. It has good dielectric behavior and dielectric strength.

 

Application Method: Jyoti -B-192 can be applied by spraying, brushing & dipping methods. Curing occurs at room temperature but can be made faster by heat. The supplied is used   in application methods and second coat is done after 60 minutes, if desired. The varnish filled tank is covered tightly to prevent losses of solvents viscosity can be well maintained. Otherwise THINNER-B-192 is used to adjust optimum viscosity.

Uses: 

• Jyoti -B-192 is used as a finishing, impregnating & coating varnish for stares, transformer, electric motors, transformer oil tanks, synthetic resins, stamping stacks bonded
• Phenolic laminates circuit boards. Jyoti-B-192 is used to protect against chemicals & moisture to above electrical appliances

 

Product Details:

Gloss wood varnish for interior use only & many more applications. 

Decoration and protection: Uses of wooden surfaces, low cost paint, Idol murthi varnish & many other uses.

Features 

• Decoration
• Protection
• Durable

Additional Information:

• Delivery Time: 3-4 days