Epoxy Resin

Product Details:

Product Description:
Easy to obtain beautiful, glossy results whether you’re a professional or it’s your first time using epoxy
Unique 2-part, high-viscosity epoxy resin coating cures at room temperature
Cures without bubbling or blushing
Cures to a 100% waterproof, clear, deep glass-like finish on bar, table, and counter tops
Resists scratches, stains, and yellowing
Simple 1 to 1 mix ratio makes it very easy to use

Additional Information:

• Production Capacity: 100 tonne
• Delivery Time: 3-4 days
• Packaging Details: 1kgs, 4kgs,,20kgs,180kgs

Product Details:

Jyoti K12 Hardner is a hardener for use with unsaturated polyester and polyesterimide impregnating resins. Hardener K12 takes part in reaction (polymerization) & helps Dobeckan resin to form cured film. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC)

Areas Of Application: Hardener K12 acts as a catalyst for UP resins such as

• Jyoti 11002 / Jyoti 11080 / Jyoti 11040 / Jyoti 12001 etc

Additional Information:

• Delivery Time: 3-4 days

Product Details:

Description: Epoxy Gel Coat (Red) is a specially formulated compound having thixotropic consistency. It is used in combination with room temperature curing Jyoti Hardener 1758. The curing of resin compound is a polyaddition reaction, which occurs at room temperature. Epoxy Gel Coat (Red) + Jyoti Hardener 1758 is a fast curing system with hard cured mass. Epoxy Gel Coat is also available black & white colour on request.

Areas of Application: Wet winding - Epoxy Gel Coat (Red) in combination with Jyoti Hardener 1758 (for fast curing) or EH 411 (For slow curing) are used as a wet winding resin for salient pole armatures as an insulating adhesive during winding process. Finishing varnish - coat over exposed winding of electrical machines up to class F (155°C) for improved resistance to moisture & chemicals.

Properties of cured material: The system is characterized by good adhesion to most organic and inorganic materials. The hard cure shows good mechanical electrical properties & excellent chemical & humidity resistant. 

• Low pot life of mixture.
• Fast cure at RT.
• Hard & Brittle cured film.
• Excellent chemical & water resistance

Application Method:

• Wet Winding: Mix the resin + Hardener in required proportion. Apply the mixture with the help of nylon spatula layer by layer like buttering on the magnet wire during the winding process. After completing the winding process the armature is exposed to 80-100oC for curing.

• Finishing Varnish: Epoxy Gel Coat (Red) with Jyoti Hardener 1758 or EH 1411 can be applied by brush or spray. Thinner 1221 additions are necessary to adjust the viscosity for a particular application. Considering limited pot life addition of Thinner 221 is added first in Epoxy Gel coat (Red) & after waiting period of 10-15 minutes the required hardener is added in the mixture. Further details on application of Epoxy Gel Coat.

Other Details

• Batch no: 0212/19
• Tare weight: 45 gm

Caution: Destroy the tin immediately after use.In no case should any item be stored or human/ animal consumption. 

Additional Information:

• Delivery Time: 3-4 days